SOLVENTS & DEVELOPERS

INK DEVELOPER
INK STOP
LACQUER/ ADHESIVE SOLVENT
INK THINNER
UNEXPOSED EMULSION DEVELOPER
EXPOSED EMULSION DEVELOPER
HIGH-REZ STRIPPER
HI-REZ DEVELOPER
AIRBRUSH SOLVENT


INK DEVELOPER

Specially formulated blend for fine line development, quick drying and minimal odor.

Top

INK STOP

Use on a clean-up side of developing pad to stop developing action. Also thins OPTITRANS/ OPTIFOIL Adhesive. Specify Slowor Fast dry when ordering. Ink Stop Fast Dry is the solvent/thinner for CC Adhesive.

Top

LACQUER/ ADHESIVE SOLVENT

Blended for 1-Pass removal of most sealers and lacquers. Also thins NR Medium Tack and NR High Tack Adhesives.

Top

INK THINNER

Compatible with all solvent inks. Use to thin and revive old inks.

Top

UNEXPOSED EMULSION DEVELOPER

Formulated to remove unexposed emulsion with foam pad while strengthening exposed image.

Top

EXPOSED EMULSION DEVELOPER

Use to remove exposed emulsion after ink developing.

Top

HIGH-REZ STRIPPER

Previously known as HR Solvent, Hi-Rez Stripper is formulated for "1-pass" removal of the Hi-Rez Sealer in multi-color OptiSlick and CC Adhesive methods. Hi-Rez Stripper will remove Hi Rez Sealer in one cleanup pass without damaging the OptiSlick release coating or CC Adhesive coating.

Top

HI-REZ DEVELOPER

The answer to many water based staining problems, this mild solvent is used to remove Hi-Rez Sealer, Opaque White Hi-Rez, and Hi-Rez Transfer Lacquer after the water based color is printed. It will not damage fine detail or screened images and develops in the same manner as solvent ink coatings.

Top

AIRBRUSH SOLVENT
To reduce inks when airbrushing. This solvent slows the drying of inks to eliminate orange peel effect, and will help prevent the airbrush from clogging.